Your Title Goes Here

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

Click Here

Product Variety: JJ-PKM-C02 swing gate operator
Variety: Hefty Duty Automated Swing Gate Opener
Coloration: Silver
Rotational Velocity: 250RPM
Rod’s Running Pace: 1.6cm/s
Rod’s Max Travel: 300MM/400MM/600MM
Max Single-leaf Size: 2.5m
Max Single-leaf Fat: 250KG/350KG
Electricity supply: DC24V,6A
Protection Calss: IP55
Content: Stainless steel alloy
Packaging Information: 1 established in a carton,twenty sets in a pallet Stainless Steel DC24V Worm Equipment Weighty Obligation Computerized Swing Gate Opener

Merchandise ApplicationThis double gate opening program is a sturdy,tuff,extended lasting,this sort double swing CZPT up to 2.5 m in size. The motor can take care of gentle gates. The PKM-C03 swing gate operators is a smooth style telescopic linear screw variety actuator that is created of stainless metal with a solid alloy motor housing.The 2 motors make are built of metallic (no plastic, fibre or nylon).The PKM-C02 swing gate opener is fitted with an unexpected emergency guide override on each and every actuator to allow the person to open up the CZPT manually in circumstance of an crisis these kinds of as a energy failure situation.

Electrical power Supply 24V 6A Electrical Motor Electrical power 24V 40W * two
Recent 6A Motor Velocity 250RPM
Travel time 11S Actuator Stroke 300MM/400MM/600MM
Max. One Leaf Width 2.5M Max. Single fat 250KG/350KG
Working Temperature -20°C~+50°C Defense Class Ip55

Electroic management board JJ-EG-22A
Primary Features1. Field examined by EU and US consumers with Min 30000 open up/close cycles.2. DC 24V voltage motor that is safe and suitable with back up electricity source.3. Copper made worm equipment driving style guarantees the motor lengthier operating daily life and very peaceful.4. Super swift manually launch with protected custom-made important in circumstance of electrical power failure.5. Delicate start off and slow quit.6. Adjustable opening/closing interval time of double gate leaves.7. Vehicle-cease if any obstacles detected throughout operation.8. Constructed in max motor managing time adjustable for numerous basic safety defense.9. Independently alter the force of double gate leaves.ten. Single leaf or double leaves procedure.eleven. Straightforward installation and reduced routine maintenance.12. twelve months assure,life long submit revenue services.
InstallationsRear Bracket Installation Alternate options to Gate Posts
Stainless Metal DC24V Worm Gear Large Responsibility Automatic Swing Gate Opener JJ-PKM-C02 Gate parts inclueded Package for Stainless Metal DC24V Worm Equipment Large Obligation Computerized Swing Gate Opener
Certifications AccessoriesSolar programSolar panel: Max 20W electricity, in circumstance of unstable electric power or vitality-conserving.

Solar demand controller: Manage the photo voltaic panel often stays in the optimum electricity to completely cost the battery rapidly.

Back up battery: 12V 5AH
Photocell JJ-HW-051.dimension: 9.3cm*4.4cm*4.1cm2.The photocells ought to be mounted at top of much more than 20cm above the ground. 3.And the length between transmitter and receiver should be much more than 50cm.
Working assortment 30-40m
Flashing light-weight JJ-JD02For lamp optional:DC24V AC220VAC110V AC/DC 12V-265V
Wireless keypadJJ-TKM-01Semi-Computerized PET Bottle Blowing Device Bottle Generating Device Bottle Moulding MachinePET Bottle Creating Device is ideal for making PET plastic containers and bottles in all shapes. It is widely employed to generate the carbonated bottle, mineral drinking water, pesticide bottle oil bottle cosmetics, 6+children Inventive STEM toys Gear technologies Huge Siege Motor vehicle blocks 4in1 Equipment remote technic toy Assembly engineer toy (PA571) extensive-mouth bottle and very hot fill bottle etc.
GSM Controller1. No get in touch with costs. The GSM Gate Opener rejects the phone from authorized.2. A number of apps, (gates, boundaries, garage doorways, shutters and entry doors or other remote control device).3.Safe-Employing caller ID for identification, unidentified callers are overlooked.4. Can be operated from anyplace, nodistance restrict.5. Include or get rid of consumers by Straightforward SMS Textual content command. Our Firm Our FactoryOur Team
Our Warehouse
Our Workshop
Our Service Pre-Sales Services* Inquiry and consulting assistance. * Sample screening support. * See our Manufacturing unit.
Following-Income Service* Instruction how to instal the machine, instruction how to use the equipment. * Engineers accessible to services equipment overseas.
Packing & Delivery

Dimensions seventy nine (L) * 33(W) *eleven (D)
Excess weight 15KG
Packing Information The typical package deal is carton(Measurement: L*W*H). .If container is as well tigher,we will use pe film for packing or pack it in accordance to consumers unique ask for.

Q1: What is the Guarantee for swing gate opener ?A1:we have 1 yr warranty time ,If any quality issues on our facet occured in this interval ,we will take resposible for it Q2: What is connponents of 1 set swing gate opener ?A2:Each Kit swing gate opener inclduing 2motors , 1 manage panel , China company higher precision mini crown wheel straight bevel equipment pinion 2 distant controls, 1 person book , 1 established hardward equipment for installation .
Q3:What is the securiy device for swing gate opener ?A3: Our management panel have terminals for infrared sensor ,flashing mild , it can avoid some pointless incident.Q4: How about the OEM?A4: We can set costomers’ details and emblem on the goods. Q5: What is bundle dimensions, weight ?A5: Package dimensions: 79cm*31cm*10cm . Gross Excess weight : 18KG Q6: What is the Volatage enter ?A6: Volatage assortment : 110V-240V Q7:Is there any rapid release system for power failure?A7:Our method have clutches device , when the electrical power failure ,just use a Allen crucial to release the clutch , and push the doorway open or shut by hand Q8:Is there low-cost shipping and delivery expense to import to our nation?A8: For little buy,specific will be greatest. examination 2 sets the ship expense will be aggressive .For bulk purchase,sea ship way is best but get a lot time. For urgent orders,we advise by means of air to airport in addition our ship companion send to your doorway.
Relevant Products PKM-C02 Automated Swing Gate Opener
PYM-A01 Computerized Sliding Gate Opener
DZ-A2291 Automatic Highway Barrier
If you have any inquiries,pls speak to with me.thank u quite significantly.Wechat : 186595716 TM: cn200044554 Tel:186595716

Synthesis of Epicyclic Gear Trains for Automotive Automatic Transmissions

In this article, we will discuss the synthesis of epicyclic gear trains for automotive automatic transmissions, their applications, and cost. After you have finished reading, you may want to do some research on the technology yourself. Here are some links to further reading on this topic. They also include an application in hybrid vehicle transmissions. Let’s look at the basic concepts of epicyclic gear trains. They are highly efficient and are a promising alternative to conventional gearing systems.

Synthesis of epicyclic gear trains for automotive automatic transmissions

The main purpose of automotive automatic transmissions is to maintain engine-drive wheel balance. The kinematic structure of epicyclic gear trains (EGTs) is derived from graph representations of these gear trains. The synthesis process is based on an algorithm that generates admissible epicyclic gear trains with up to ten links. This algorithm enables designers to design auto gear trains that have higher performance and better engine-drive wheel balance.
In this paper, we present a MATLAB optimization technique for determining the gear ratios of epicyclic transmission mechanisms. We also enumerate the number of teeth for all gears. Then, we estimate the overall velocity ratios of the obtained EGTs. Then, we analyze the feasibility of the proposed epicyclic gear trains for automotive automatic transmissions by comparing their structural characteristics.
A six-link epicyclic gear train is depicted in the following functional diagram. Each link is represented by a double-bicolor graph. The numbers on the graph represent the corresponding links. Each link has multiple joints. This makes it possible for a user to generate different configurations for each EGT. The numbers on the different graphs have different meanings, and the same applies to the double-bicolor figure.
In the next chapter of this article, we discuss the synthesis of epicyclic gear trains for automotive automatic transaxles. SAE International is an international organization of engineers and technical experts with core competencies in aerospace and automotive. Its charitable arm, the SAE Foundation, supports many programs and initiatives. These include the Collegiate Design Series and A World In Motion(r) and the SAE Foundation’s A World in Motion(r) award.


The epicyclic gear system is a type of planetary gear train. It can achieve a great speed reduction in a small space. In cars, epicyclic gear trains are often used for the automatic transmission. These gear trains are also useful in hoists and pulley blocks. They have many applications in both mechanical and electrical engineering. They can be used for high-speed transmission and require less space than other types of gear trains.
The advantages of an epicyclic gear train include its compact structure, low weight, and high power density. However, they are not without disadvantages. Gear losses in epicyclic gear trains are a result of friction between gear tooth surfaces, churning of lubricating oil, and the friction between shaft support bearings and sprockets. This loss of power is called latent power, and previous research has demonstrated that this loss is tremendous.
The epicyclic gear train is commonly used for high-speed transmissions, but it also has a small footprint and is suitable for a variety of applications. It is used as differential gears in speed frames, to drive bobbins, and for the Roper positive let-off in looms. In addition, it is easy to fabricate, making it an excellent choice for a variety of industrial settings.
Another example of an epicyclic gear train is the planetary gear train. It consists of two gears with a ring in the middle and the sun gear in the outer ring. Each gear is mounted so that its center rotates around the ring of the other gear. The planet gear and sun gear are designed so that their pitch circles do not slip and are in sync. The planet gear has a point on the pitch circle that traces the epicycloid curve.
This gear system also offers a lower MTTR than other types of planetary gears. The main disadvantage of these gear sets is the large number of bearings they need to run. Moreover, planetary gears are more maintenance-intensive than parallel shaft gears. This makes them more difficult to monitor and repair. The MTTR is also lower compared to parallel shaft gears. They can also be a little off on their axis, causing them to misalign or lose their efficiency.
Another example of an epicyclic gear train is the differential gear box of an automobile. These gears are used in wrist watches, lathe machines, and automotives to transmit power. In addition, they are used in many other applications, including in aircrafts. They are quiet and durable, making them an excellent choice for many applications. They are used in transmission, textile machines, and even aerospace. A pitch point is the path between two teeth in a gear set. The axial pitch of one gear can be increased by increasing its base circle.
An epicyclic gear is also known as an involute gear. The number of teeth in each gear determines its rate of rotation. A 24-tooth sun gear produces an N-tooth planet gear with a ratio of 3/2. A 24-tooth sun gear equals a -3/2 planet gear ratio. Consequently, the epicyclic gear system provides high torque for driving wheels. However, this gear train is not widely used in vehicles.


The cost of epicyclic gearing is lower when they are tooled rather than manufactured on a normal N/C milling machine. The epicyclic carriers should be manufactured in a casting and tooled using a single-purpose machine that has multiple cutters to cut the material simultaneously. This approach is widely used for industrial applications and is particularly useful in the automotive sector. The benefits of a well-made epicyclic gear transmission are numerous.
An example of this is the planetary arrangement where the planets orbit the sun while rotating on its shaft. The resulting speed of each gear depends on the number of teeth and the speed of the carrier. Epicyclic gears can be tricky to calculate relative speeds, as they must figure out the relative speed of the sun and the planet. The fixed sun is not at zero RPM at mesh, so the relative speed must be calculated.
In order to determine the mesh power transmission, epicyclic gears must be designed to be able to “float.” If the tangential load is too low, there will be less load sharing. An epicyclic gear must be able to allow “float.” It should also allow for some tangential load and pitch-line velocities. The higher these factors, the more efficient the gear set will be.
An epicyclic gear train consists of two or more spur gears placed circumferentially. These gears are arranged so that the planet gear rolls inside the pitch circle of the fixed outer gear ring. This curve is called a hypocycloid. An epicyclic gear train with a planet engaging a sun gear is called a planetary gear train. The sun gear is fixed, while the planet gear is driven.
An epicyclic gear train contains several meshes. Each gear has a different number of meshes, which translates into RPM. The epicyclic gear can increase the load application frequency by translating input torque into the meshes. The epicyclic gear train consists of 3 gears, the sun, planet, and ring. The sun gear is the center gear, while the planets orbit the sun. The ring gear has several teeth, which increases the gear speed.
Another type of epicyclic gear is the planetary gearbox. This gear box has multiple toothed wheels rotating around a central shaft. Its low-profile design makes it a popular choice for space-constrained applications. This gearbox type is used in automatic transmissions. In addition, it is used for many industrial uses involving electric gear motors. The type of gearbox you use will depend on the speed and torque of the input and output shafts.

China DC24V Worm Gear Heavy Duty Automatic Swing Gate Opener Stainless Steel JJ-PKM-C02 Swing Gate Operator 250KG350KG DC24V,6A 2.5m     with Best SalesChina DC24V Worm Gear Heavy Duty Automatic Swing Gate Opener Stainless Steel JJ-PKM-C02 Swing Gate Operator 250KG350KG DC24V,6A 2.5m     with Best Sales
editor by czh 2023-02-18